Panasonic CZ-256ESMC3 Operating Instructions Manual page 34

"O/D unit information" screen
A: [Select all]/[Clear all] buttons
[Select all] Select all outdoor units.
[Clear all] Cancel selection of all
outdoor units.
B: Outdoor unit details are displayed in a list.
You can scroll up or down by swiping or flicking the screen.
Item
[Select]
Name
OutdrTmp
Demand
Silent
Current oil change time
Engine oil check sign
Inverter instant.(kW)
Solar instant.(kW)
C: Change silent mode.
The "Demand" dialogue is displayed when you touch this.
(→ "Changing the demand control settings" (P.35))
D: The contents currently displayed are output to the USB memory device as a CSV file. (→ "Outputting (saving) the displayed
contents as a CSV file" (P.32))
A
B
Select the units you want to set demand control for.
The names of the outdoor units are displayed.
You can change the names. (→ "Basic settings on the outdoor unit" (P.145))
The temperature outside is displayed.
Demand control setting status is displayed.
(→ "Demand settings on the outdoor unit" (P.93))
This displays the operational status of the out unit silent. (→ "Reducing the noise of outdoor units" (P.87))
y This is supported only by some outdoor units.
The number of operating hours after the last oil change is displayed.
(Available only when using a gas heat pump)
This displays the check sign for engine oil.
(Available only when using a gas heat pump)
y If this sign is displayed, contact the place of purchase or your servicing agent to have the oil replaced.
This displays the current value for the inverter generator instantaneous value of the ECO G HIGH POWER.
This displays the current value for the solar generator instantaneous value of the ECO G HIGH POWER.
34
Checking the operational status of the outdoor unit
Explanation
D C