Panasonic CZ-256ESMC3 Operating Instructions Manual page 159

Item
Distrib. Grp. Configure a distribution group to be measured.
The "Distrib. Grp." dialogue is displayed when
you touch this. Select the distribution group to be
measured and touch [Select].
6
Touch [Register].
The "Edit pulse meter sttgs" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
The "Pulse meter settings" screen
A: A list of pulse meters with a check mark in the
"Register" column is displayed.
B: Put a check mark next to the pulse meters you
want to edit.
C: Put a check mark next to the pulse meters you
want to enable.
D: The "Edit pulse meter sttgs" dialogue is
displayed when you touch this.
Explanation
6
B
159
Basic settings for the pulse meter
7
Put a check mark in the "Register"
column.
Put a check mark next to the pulse meters you want to
z
enable.
8
Touch [Register].
To cancel the settings, touch [Cancel].
z
D
7
8
A
C