Table of Contents
Advertisement
Editing settings
1
Put a check mark in the "Select" column.
You can select more than one.
z
1
2
Touch [Setng].
The "Edit unit settings" dialogue is displayed.
z
3
Change the settings.
Item
Name
Change the name of the indoor unit.
Touch the text box and enter with the
touchscreen keyboard.
You can enter up to 16 letters or numbers.
2
Explanation
Basic settings on the indoor unit
Item
O/D unit address
I/D unit address
Display
CNTR addr.
Fix cap
ElecHeatrCap
Group registration
y Control Gr.
y SchedleGroup
y Area
y Distrib. Grp.
Not batch
Not managed
143
Explanation
Use
to select the desired
outdoor unit address (1 to 31). ("31" is set for
interface adaptors)
Use
to select the desired
indoor unit address (1 to 64).
Use
to set the order when
displayed in a list (0 to 256).
Set the central addresses (1 to 64).
Touch the text box and enter with the
touchscreen numeric keypad.
Note
y The central address is shared with other
centralised controllers (system controllers,
etc.). Do not change unless necessary.
y An error message is displayed if you set
an address that is already in use.
y This cannot be set if multiple indoor units
are selected.
Set the fixed capacity values of the indoor
unit. (When interface adaptors are installed)
Touch the text box and enter with the
touchscreen numeric keypad.
Set the capacity of the electric heater if
the model has an electric heater. (when
calculating load distribution)
Touch the text box and enter with the
touchscreen numeric keypad.
Register the group the unit belongs to.
The group names are displayed when you
touch the text boxes.
Note
y By putting a check mark in the "Select"
column of the indoor units belonging to
the same group, you can edit the settings
at the same time and register them all
together.
Select "" if the device is not to be subject to
operations and select "" if it is to be subject
to operations.
Select "" if the device is to be remove as
a subject of management by this unit, and
select "" if it is to be subject of management
by this unit.
Continued on next page
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
