5
Put a check mark in the "Select" column.
Select the outdoor units you want to run a test operation
z
for.
You can select multiple outdoor units.
z
5
6
Touch [Oprn].
The operation dialogue is displayed.
z
7
Select the operation mode ([Cool] or
[Heat]) (7-1) and touch [ON] (7-2).
The settings are registered and the operation dialogue
z
closes.
The test operation starts.
z
6
7-
1
7-
2
8
Check the "Stus" column.
During the test operation, the operation mode is shown in
z
the "Stus" column (
9
To stop the test operation, touch [Oprn],
then touch [OFF] in the operation
dialogue.
208
Running a test operation
for cooling and
for heating).