Panasonic CZ-256ESMC3 Operating Instructions Manual page 142

The "I/D unit settings" screen
A: Select the adaptor (this unit, communication
adaptor) that the indoor unit is connected to.
B: Select the linked system that the indoor unit
is connected to.
C: A list of indoor units with "Yes" in the
"Connect" column is displayed when you
touch this (turn the setting on). Touch again
and all indoor units are displayed in a list.
(turn the setting off)
D: A list of indoor units with a check mark in
the "Register" column is displayed when you
touch this (turn the setting on). Touch again
and all indoor units are displayed in a list.
(turn the setting off)
E: Details about indoor units are displayed in a
list.
Item
[Select]
No.
Name
Address
Connect
Main
Register
Not batch
Not managed
Display
Central address
Control Gr.
SchedleGroup
Area
Distrib. Grp.*
Cap
Fix cap
I/D type
PrdctTyp
ElcHeatr
* If the distribution mode (P.160) is set to "Time", do not allocate PAC and GHP to the same distribution groups.
F: Central addresses are automatically set for indoor units with a check mark in the "Register" column. (→ "Automatically setting
central addresses" (P.144))
G: When you touch this, the "Edit unit settings" dialogue is displayed for indoor units with a check mark in the "Select" column.
Attention
y If the distribution mode (→ "Set the distribution mode" (P.160)) is set to "Time", do not allocate PAC and GHP to the same distribution
groups.
A
E
Select the indoor units whose settings you want to change.
The serial number is displayed.
The names of the indoor units are displayed.
The addresses of the indoor units are displayed.
If connected to this unit, "Yes" is displayed.
If the main unit, "Main" is displayed.
If you want it to be managed by this unit, put a check mark here.
"" is displayed if the device is not subject to batch operations, and "" is displayed if it is subject to batch
operations.
"" is displayed if the device is not subject to management, and "" is displayed if it is subject to management.
This indicates the display order.
This shows the central address.
This shows the control group name it belongs to.
This shows the schedule group name it belongs to.
This shows the area group name it belongs to.
This shows the distribution group name it belongs to.
This shows the operational capacity values for the indoor unit.
The fixed capacity values of the indoor unit.
This shows the model name of the indoor unit.
This shows the product type (PAC or GHP).
This shows the capacity values of the electric heater.
Basic settings on the indoor unit
B
F
Explanation
142
C D
G