Table of Contents
Advertisement
Item
Mode
Set the operating mode to fan.
Set either [Fan] or [----]*.
Set T.
Set the temperature with
Set "±1" or "±2", at 1 °C steps between 16 °C
and 28 °C*.
Fan
Use
Set "Auto", "High", "Mid.", or "Low"*.
I/D unit cyclic
The indoor unit cycling control function is
Valid
enabled for the selected indoor unit if you put a
check mark here.
* When left blank, that item does not cause any operation.
5
Touch [Register].
The "Setting" dialogue closes.
z
To cancel the settings, touch [Cancel].
z
6
Set other indoor units.
Repeat steps 3 to 5.
z
7
Touch [Timer set.].
The "Term setting" dialogue is displayed.
z
7
Control operation at regular intervals [I/D unit cyclic]
Explanation
and
.
to set the fan speed.
5
99
8
Touch the number.
You can set 4 different time slots.
z
8
9
Set the times.
The time on the left is the control start time. The time on
z
the right is the control end time.
Use
to set the time. Hours can be set in the
z
range 0 to 23, and minutes may be either "00" or "30".
9
10
Set the control interval.
Select "3 min.", "4 min.", or "5 min.".
z
Repeat steps 7 to 9 to set for numbers [1] to [4].
z
10
Continued on next page
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
