Table of Contents
Advertisement
(2) Touch the time slot to accumulate (4-2).
The settings are registered and the "Specify time" dialogue
z
closes.
Refer to "RglrHourRnge" in "Calendr sttgs for distr calc"
z
(P.148) for information about "Rglr hour1" to "Rglr hour8".
The "O/D unit acc." screen
A:
Set the values to be displayed. Touch to
select either "Adaptor value" or "Total value".
B:
Set the periods to be displayed. The
"Calendar" dialogue is displayed when you
touch this.
y When "Total value" is set, totals matching
the time slot set in "Time" ("RglHour",
"OutOf hour", etc.) are displayed. If "All
hours" is set in "Time", all totals are
displayed.
C:
Set the time slots to be displayed. The
"Specify time" dialogue is displayed when
you touch this.
D:
The accumulated values for outdoor units are
displayed in a list.
You can scroll up or down by swiping or
flicking the screen.
Item
Name
OperTime
OprCount
Inverter accumul.(kWh)
Solar accumul.(kWh)
E:
You can output (save) the displayed list of outdoor unit accumulation in CSV format. (→ "Outputting (saving) the displayed contents
as a CSV file" (P.32))
Checking the list of accumulated values on the outdoor unit
5
4-
2
A
D
The names of the outdoor units are displayed.
The number of operation hours for the outdoor units are displayed.
The number of operation cycles for the outdoor units are displayed.
The accumulated values if inverter generation is being used are displayed.
The accumulated values if solar generation is being used are displayed.
68
Check accumulated values.
B
Explanation
C
E
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
