Panasonic CZ-256ESMC3 Operating Instructions Manual page 29

"I/D unit information" screen
A: [Select all]/[Clear all] buttons
[Select all] Select all indoor units.
[Clear all] Cancel selection of all indoor
units.
B: Change list order. The list order changes each
time you touch it.
Address The display follows the address
order set in "I/D unit settings"
(P.141).
Display The display follows the order set
in "I/D unit settings" (P.141).
O/D unit The display follows the outdoor
unit display order set in "O/D unit
settings" (P.145).
C: Indoor unit details are displayed in a list.
You can scroll up or down by swiping or flicking
the screen.
Item
[Select]
Name
Filter time
OprCount
Demand
T/S
Fan
SuctnTmp
DschgTmp
VentOpen
D: Change the settings for ventilation output.
The "Vent." dialogue is displayed when you touch this. (→ "Changing the settings for ventilation output" (P.30))
ON Operation of the ventilation output starts.
OFF Operation of the ventilation output stops.
E: Change the demand control settings.
The "Demand setting" dialogue is displayed when you touch this. (→ "Changing the demand control settings" (P.31))
ON Demand control is set.
Cancel Demand control is cancelled.
F: The contents currently displayed are output to the USB memory device as a CSV file. (→ "Outputting (saving) the displayed
contents as a CSV file" (P.32))
A
C
Select the units you want to make ventilation settings or demand settings for.
The names of the indoor units are displayed.
You can change the names. (→ "I/D unit settings" (P.141))
This displays the approximate time remaining before
"- -" is displayed for sub units in control groups.
The number of operation cycles for the day is displayed.
Demand control setting status is displayed. "ON" is displayed when demand control is set. (→ "Demand settings on
the indoor unit" (P.90))
This displays the operational status of the thermostat. "ON" is displayed when the thermostat is working.
The actual fan strength (High/Mid./Low/Auto/OFF) is displayed.
The current inlet temperature is displayed.
The current outlet temperature is displayed.
The ventilation output setting (ON or OFF) is displayed.
Checking the operational status of indoor units
Explanation
is displayed.
29
B
F D E