Configuring Password; Figure 4-3 Password - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
LABEL
Enable Wildcard
Off Line
Edit Update IP Address:
Server Auto Detect
User Specify
IP Addr
Apply
Reset
4.5

Configuring Password

To change your ZyWALL's password (recommended), click SYSTEM, then the Password tab. The screen
appears as shown. This screen allows you to change the ZyWALL's password.
The following table describes the fields in this screen.
4-4
Table 4-2 DDNS
Select the check box to enable DYNDNS Wildcard.
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a
URL (that you can specify) while you are off line.
Select this option to update the IP address of the host name(s) automatically by
the DDNS server. It is recommended that you select this option.
Select this option to update the IP address of the host name(s) to the IP address
specified below. Use this option if you have a static IP address.
Enter the IP address if you select the User Specify option.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.

Figure 4-3 Password

DESCRIPTION
System