Figure 9-8 Menu 15.1.1 - First Set - ZyXEL Communications ZyWALL 10/10 User Manual

Set Name= ?
Idx Local Start IP
--- ---------------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1 (described
Ordering Your Rules
Ordering your rules is important because the ZyWALL applies the rules in the order that you specify. When
a rule matches the current packet, the ZyWALL takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed
up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current
set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
FIELD
Set Name Enter a name for this set of rules. This is a required field. If this
field is left blank, the entire set will be deleted.
NAT
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
Action= Edit
Press ENTER to Confirm or ESC to Cancel:
Figure 9-8 Menu 15.1.1 — First Set
later) and the values are displayed here.
Table 9-5 Fields in Menu 15.1.1
DESCRIPTION
ZyWALL 10/10 II/50 Internet Security Gateway
Global Start IP Global End IP
--------------- ---------------
Select Rule=N/A
Type
------
EXAMPLE
NAT_SET
9-11