Table of Contents
Advertisement
CHAPTER 4
Installing the BTI7800 Series Chassis
Site Requirements
Table 30: Environmental Site Requirements
Site Criteria
Location
Copyright © 2019, Juniper Networks, Inc.
Site Requirements on page 75
Chassis Installation Kits on page 76
Tools for Installation on page 78
Installing the BTI7802 Chassis Rear Exhaust Adapter on page 78
Rack-Mounting the Chassis on page 84
Grounding the Chassis on page 89
Powering the Chassis on page 94
Connecting the ESD Wrist Strap Cable on page 105
WARNING:
You must observe these site and safety requirements to ensure
safe operations and proper performance of BTI7800 Series equipment.
NOTE:
Restricted Access refers to an inaccessible location that is normally
inaccessible by the general public by means of any administrative or
engineering control measure, but is accessible to authorized personnel who
might not have laser safety training.
Requirements
BTI7800 equipment must be installed in a
Restricted Access Location in the Central Office
(CO) of Network Telecommunication Facilities.
The chassis should be installed where personnel
cannot interfere with cables and cords
connected to the chassis.
The chassis should be installed where cables
and rack location do not obstruct chassis
ventilation openings.
75
Advertisement
Table of Contents
