Table of Contents
Advertisement
BTI7800 Series Hardware Overview and Installation Guide
Rack-Mounting the BTI7802 Chassis
Table 35: Rack-Mounting Considerations
Issue
Rack size
Cabinet size
Chassis placement in rack
Number of chassis in a rack
86
Installation Tools and Kits
Number 1 and Number 2 Phillips screwdrivers
Chassis Installation Kit (BT8A7865)
NOTE:
23-inch and 19-inch mounting brackets are assembled on every
shipped BTI7802 chassis. 21-inch mounting brackets are packaged as a
separate item and are shipped with the chassis. Before you begin this
procedure you should remove unnecessary mounting brackets by unfastening
and removing the screws that attach the brackets to the chassis. Re-use
previously mounted bracket screws should you require to attach the 21 inch
mounting brackets.
Place the BTI7802 on a flat surface with the front facing you.
1.
Verify if you need to remove or install the mounting brackets.
If you are mounting the chassis in a 23-inch rack or frame, verify if you need to install
2.
the BTI7802 Chassis Rear Exhaust Adapter.
See
"Installing the BTI7802 Chassis Rear Exhaust Adapter" on page
Get into rack-mounting position. Choose one of the following options:
3.
One person is needed if the chassis is being seated on a rack shelf.
Description
ANSI 19 in
ETSI 600 mm
ANSI 23 in
ETSI 600 mm x 600 mm
NEBS 24 in (depth)
For rack stabilization, load the rack from the bottom up with
the heaviest chassis at the bottom.
Up to 14 BTI7802 chassis can be installed in a standard 42U
server rack. There are no spacing requirements for the amount
of space between chassis.
Copyright © 2019, Juniper Networks, Inc.
78.
Advertisement
Table of Contents
