Table of Contents
Advertisement
BTI7800 Series Hardware Overview and Installation Guide
Table 33: Miscellaneous Kits and Accessories (continued)
Name
BTI7801 Chassis Support Bracket Kit
Tools for Installation
Installing the BTI7802 Chassis Rear Exhaust Adapter
78
PEC
BT8A78SSB3
Tools to have on-hand when you are ready to install the BTI7800 Series chassis:
Number 1 Phillips screwdriver
Number 2 Phillips screwdriver
10 mm socket or wrench
®
T15 Torx
screwdriver (for fastening mounting brackets onto a BTI7814 chassis)
Grounded antistatic mat to place modules
ESD grounding strap to prevent electrostatic discharge damage
Wire stripping and crimping tool
Multimeter
Tape measure, to verify adequate spacing around the rack, and between chassis in a
multi-chassis rack configuration
Use this procedure to install the Rear Exhaust Adapter onto a BTI7802 chassis to
accommodate front-to-rear airflow when the chassis is mounted onto a 23-inch rack.
Prerequisites:
Description
Additional bracket for use when
mounting the BTI7801 chassis into a
4-post 19-inch or ETSI 600-mm cabinet.
Copyright © 2019, Juniper Networks, Inc.
Advertisement
Table of Contents
