Table of Contents
Advertisement
Table 81: AC Power and Power Cables (continued)
Component
1.5 meter AC Power Cord with North
American Plug
1.5 meter AC Power Cord with European
Plug
1.5 meter AC Power Cord with UK Plug
1.5 meter AC Power Cord with Australian
Plug
OPS Specifications
Table 82: OPS Specifications
Parameter
Physical and Environmental
1RU 19" and 23" rack mountable chassis
Weight
Power Consumption
Input Voltage
Operating Temperature Range
Storage Temperature Range
Optical
Operating Wavelength Range 1
Operating Wavelength Range 2
2
Insertion Loss
(splitter)
Polarization Dependent Loss
Copyright © 2019, Juniper Networks, Inc.
Component PEC
BP1A58GA
BP1A58HA
BP1A58JA
BP1A58KA
All specifications are end of life and over the full operating temperature range.
1
Chapter 9: Optical Protection Switch (OPS)
Notes
Plug (to power source): NEMA 5-15
Connector (to chassis): IEC 60320 C13
Two cables are required per OPS (one cable for each
OPS AC power unit (BT7A39AE)).
Two cables are required per OPS (one cable for each
OPS AC power unit (BT7A39AE)).
Two cables are required per OPS (one cable for each
OPS AC power unit (BT7A39AE)).
Two cables are required per OPS (one cable for each
OPS AC power unit (BT7A39AE)).
Specification
436mm (W) x 195mm (D) x 44mm (H)
4 kg (fully populated)
15 W (maximum)
-48 VDC to -60 VDC
-5°C to +55°C
-40°C to 70°C
1500 nm to 1620 nm
1260 nm to 1360 nm
4.0 dB (maximum)
0.2 dB (maximum)
213
Advertisement
Table of Contents
