Table of Contents
Advertisement
Installing a UFM
Copyright © 2019, Juniper Networks, Inc.
Figure 32: Top Latch - UFM3 and UFM6
Figure 33: Top Latch - UFM4
NOTE:
The design of the UFM4 top latch accommodates the space taken
up by the integrated MSA transceiver.
The bottom latch on all UFMs
that provides leverage when you open or close the latch.
Figure 34: Bottom Latch - UFMs
Use this procedure to install a Universal Forwarding Module (UFM).
Prerequisites:
If you are installing a (UFM6) module on a BTI7814 chassis, ensure that BTI7814 Booster
Fans are also installed in the chassis. See
("UFM Latches" on page
116) has an extendable handle
"BTI7814 Booster Fans" on page
Chapter 5: BTI7800 Series Modules
57.
117
Advertisement
Table of Contents
