Table of Contents
Advertisement
CHAPTER 7
BTI7800 Series Field Replaceable Units
(FRUs)
BTI7814 Field-Replaceable Units (FRUs)
Copyright © 2019, Juniper Networks, Inc.
BTI7814 Field-Replaceable Units (FRUs) on page 179
BTI7802 Field-Replaceable Units (FRUs) on page 193
BTI7801 Field-Replaceable Units (FRUs) on page 199
Field-replaceable units are pre-installed when the BTI7814 is delivered. This section
describes how to remove and replace the FRUs on the BTI7814.
WARNING:
Use proper caution when working with the equipment. This chapter
might not cover every possible hazardous condition.
Safety Warnings
This equipment is intended to be installed and serviced by qualified personnel.
Be familiar with the safety guidelines described in the BTI7800 Series Hardware Overview
and Installation Guide.
Ensure the chassis is installed properly and secured onto the rack.
Ensure you have an unobstructed path to the chassis.
Avoid contact with rotating fan blades.
Electrical Warnings
CAUTION:
Electrostatic Discharge (ESD) can damage module components,
causing complete or intermittent failures. ESD can occur when a module is
improperly handled.
To prevent ESD damage to a module, follow these guidelines:
179
Advertisement
Table of Contents
