Bti7800 100-Gbps Transceiver Optical Specifications; Table 70: Qsfp28 100Ge Aoc: Jnp-100G-Aoc-Xx (740-06Xxxx); Table 71: Cfp 100Gbase-Sr10 100M: Bp3Amass - Juniper BTI7800 Series Hardware Overview And Installation Manual

Table 69: QSFP28 100GE SR4: QSFP-100GBASE-SR4 (740-058734) (continued)
Parameter
Power consumption
Compliance

Table 70: QSFP28 100GE AOC: JNP-100G-AOC-xx (740-06xxxx)

Parameter
Signaling speed per lane
Number of lanes
Reach
Connector/Latch type
Power consumption
Compliance

BTI7800 100-Gbps Transceiver Optical Specifications

Table 71: CFP 100GBASE-SR10 100m: BP3AMASS

Parameter
Transmitter
Signaling speed per lane (100GbE)
Copyright © 2019, Juniper Networks, Inc.
Minimum Typical
Maximum: 3.5 W
IEEE 802.3
Minimum Typical
25.78125 +/- 100 ppm
– 4
JNP-100G-AOC-1M (740-065630) - 1 m
JNP-100G-AOC-3M (740-065631) - 3 m
JNP-100G-AOC-5M (740-065632) - 5 m
JNP-100G-AOC-7M (740-065633) - 7 m
JNP-100G-AOC-10M (740-061411) - 10 m
JNP-100G-AOC-15M (740-068217) - 15 m
JNP-100G-AOC-20M (740-064981) - 20 m
JNP-100G-AOC-30M (740-064980) - 30 m
Not applicable
Maximum: 3.5 W
IEEE 802.3
NOTE: Contact Juniper Networks Support to confirm the power consumption
values for any transceiver before using for planning or implementation
purposes.
Minimum Typical
- 10.3125
Chapter 6: BTI7800 Series Transceiver Specifications
Maximum
Maximum
–
Maximum
-
Units
Units
Gbps
–
Units
Gbps
171