Table of Contents
Advertisement
Table 5: Environmental Site Requirements
Site Criteria
Location
BTI7814 (BT8A78CH14)
Electrical
BTI7802 (BT8A78CH2-I02)
BTI7801 (BT8A78CH1)
Electrostatic
Humidity
Operating temperature
BTI7814 (BT8A78CH14)
BTI7802 (BT8A78CH2-I02)
BTI7801 (BT8A78CH1)
Storage temperature
Copyright © 2019, Juniper Networks, Inc.
NOTE:
Restricted Access refers to an inaccessible location that is normally
inaccessible by the general public by means of any administrative or
engineering control measure, but is accessible to authorized personnel who
might not have laser safety training.
Be familiar with the electrical and occupational safety guidelines for your country, for
example:
In the United States, reference the latest edition of The National Electrical Code (NEC),
and the latest guidelines of the U.S. Department of Labor, Occupational Safety &
Health Administration (OSHA).
In Canada, reference the latest edition of The Canadian Electrical Code (CEC), and the
latest guidelines of the Canadian Centre for Occupational Health and Safety (CCOHS).
Chapter 1: BTI7800 Series Safety Information
Requirements
BTI7800 equipment must be installed in a
Restricted Access Location in the Central Office
(CO) of Network Telecommunication Facilities.
The chassis should be installed where personnel
cannot interfere with cables and cords
connected to the chassis.
The chassis should be installed where cables
and rack location do not obstruct chassis
ventilation openings.
See the electrical requirements in
Power" on page
40.
See the electrical requirements in
Power" on page
48.
See the electrical requirements in
Power" on page
52.
Always use ESD grounding devices when
handling components.
5% to 95% non-condensing
15°C to +32°C; 59°F to +89.6°F
-40°C to +70°C; -40°F to +158°F
"BTI7814
"BTI7802
"BTI7801
27
Advertisement
Table of Contents
