Table 17: BTI7814 Backplane DC Power Distribution
Input Feeds
Channel
A1 and B1
1
2
3
4
5
6
A2 and B2
1
2
3
4
5
6
Copyright © 2019, Juniper Networks, Inc.
Slot
Service module slots 3
and 4
Service module slots 5
and 6
Service module slots 7
and 8
Service module slots 1
and 2
Rear fans 5 and 6
CMM slot A
Front fans 1, 2, 3 and 4
Service module slots 11
and 12
Service module slots 13
and 14
Future use
Future use
Service module slots 9
and 10
CMM slot B
Future use
Each channel has a fuse rating of 20 Amps.
BTI7814 DC PEM
The BTI7814 chassis can be powered by up to four DC PEMs (BT8A78PEM3-DC). Two
DC PEMs are used to provide the A feeds, for a total of twelve channels on the chassis.
Each DC PEM powers six channels that feed various functions. A non-redundant
configuration requires two DC PEMs. A redundant configuration requires four DC PEMs.
It is recommended that you configure your chassis with four DC PEMs and connect each
PEM to its own (separate) power supply and return.
Chapter 2: BTI7800 Series Chassis
Modules
Service Modules
Service Modules
Service Modules
Service Modules
BTI7814 Booster Fans
Chassis Management Module (CMM)
Front Fan modules
Service Modules
Service Modules
Not applicable
Not applicable
Service Modules
Chassis Management Module (CMM)
Not applicable
41