BTI7800 Series Hardware Overview and Installation Guide
Table 24: FAN9 Specifications
Item
Physical Dimensions
Width
Height
Depth
Weight
Power Consumption (40°C ambient)
NOTE:
Before using for planning or implementation
purposes, contact Juniper Networks Support to
confirm the power consumption values.
Air Flow
LEDs
BTI7802 Cooling System
58
BTI7814 Booster Fan Specifications
Specification
8 in
3.5 in
6 in
2 lb
Maximum: 125 W
160 CFM
Active: Green
Fail: Red
The BTI7802 chassis is shipped with the cooling module installed. The cooling module
contains three fans, and only one cooling module is required per chassis. The cooling
module is located at the top left of the chassis above the Power Entry Modules.
Figure 14: BTI7802 Cooling Module Location
203.2 mm
88.9 mm
152.4 mm
0.9 kg
Copyright © 2019, Juniper Networks, Inc.