Bti7800 Series Laser Output Ports; Critical Site Warnings And Requirements; Table 4: Laser Output Ports - Juniper BTI7800 Series Hardware Overview And Installation Manual

BTI7800 Series Hardware Overview and Installation Guide

Table 4: Laser Output Ports

Module
96-Channel Amplifier
96-Channel Fixed Mux/Demux
Wavelength Protection Switch

Critical Site Warnings and Requirements

26
CAUTION: Read and understand all caution labels before working with the
equipment.

BTI7800 Series Laser Output Ports

The BTI7800 Class 1M laser output ports are located on the following modules.
Product Code (PEC)
BT8A78AMP1
BT8A78MD03
BT8A78WPS4
WARNING: You must observe the site and safety requirements in this section
to ensure safe operations and proper performance of BTI7800 Series
equipment.
Optical Wavelength
1528.77 nm to 1566.72 nm
1528.578 nm to 1566.928 nm
C-band: 1500 to 1570 nm
O-band: 1260 to 1350 nm
L-band: 1560 to 1620 nm
Copyright © 2019, Juniper Networks, Inc.
Port
DCM out
Line Out
C1 Out
C1-C96 Out
L1 Out
C1 Out A
L1 Out B
L1 Out A
C2 Out A
L2 Out B
L2 Out A
C3 Out A
L3 Out B
L3 Out A
C4 Out A
L4 Out B
L4 Out A