Table of Contents
Advertisement
BTI7800 Series Hardware Overview and Installation Guide
Item
Bracket Description
A
Right rear air deflector (open front,
closed rear)
B
Left rear air deflector with rear exhaust
C
Right front air intake
D
Left front cover
80
Figure 26: Rear Exhaust Adapter Kit (BT8A78REX)
Fastener
2 captive screws fasten to chassis
2 M3.5x5mm screws (supplied) fasten to 23 inch bracket
2 captive screws fasten to chassis
2 M3.5x5mm screws (supplied) fasten to 23 inch bracket
2 captive screws fasten to chassis
2 captive screws fasten to chassis
Tools required
Number 1 Phillips screwdriver - the shaft of the screwdriver should be longer than 3
inches in order to reach the screw through the tool access opening
Install the rear brackets A and B to the mounting bracket before you attach the front
brackets C and D to the chassis.
Copyright © 2019, Juniper Networks, Inc.
Advertisement
Table of Contents
