Calling Up/Closing The Configuration Window - Siemens ARCADIS Varic Operator's Manual

Configuration
Applying changes
4
of 24

Calling up/closing the configuration window

You can call up the configuration window from the syngo Configuration Panel.
Select Options > Configuration in the main menu.
Double-click this button.
– The Examination Set Configuration window appears.
(1) Medical application area
(2) Virtual patient anatomy (VPA)
(3) Area of available examination sets
(4) Area of active examination sets
(5) Operating programs with the parameter settings specific to the examination
set in the individual operating modes
Once you have changed the settings of the examination sets, you must confirm
your entries.
Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The configuration dialog remains open for further entries.
Or
Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The configuration dialog closes.
– The changes you made in the examination settings are automatically
applied to the next examination.
Operator Manual
SPR2-310.620.30.02.02
0