Opening A Report; Editing A Report - Siemens ARCADIS Varic Operator's Manual

Examination
For the current patient
For another patient
Setting the status
38
of 52

Opening a report

Select Reporting > Open Report in the Viewing task card.
– The report for the current patient is opened.
If several reports exist for the patient loaded in the Viewing task card, a dialog
box is displayed in which you select the required report.
Double-click the required report in the content area of the Patient Browser.
Or
Select the report in the Patient Browser.
Select Reporting > Open Report or click the relevant button in the tool bar
of the Patient Browser.
– The selected report is opened.

Editing a report

Apart from the work and verification status, no changes are required in the
Radiation Summary Report. The other entries can therefore not be edited.
The status for the postprocessing report is set according to the work progress.
A report with the "verified" status can be printed out for documentation purposes.
Select the relevant work status/verification status in the selection lists in the
status area.
Click Apply.
Operator Manual
SPR2-310.620.30.02.02
0
0