Writing Off-Line Files To Cd/Dvd - Siemens ARCADIS Varic Operator's Manual

Documentation
Recording files
Deleting files
80
of 98

Writing off-line files to CD/DVD

All images in bitmap format exported previously to a specific directory, can be
recorded automatically on CD/DVD-R. The path of this directory can be config-
ured in service mode. The default setting for this path is
C:\ASPIA\temp\CDR_OFFLINE.
As a rule, you cannot release radiation during the CD/DVD-R write process.
You are urgently advised to start this process outside of examination hours
(e.g. at the end of the office day).
In exceptional cases (emergencies), you can release radiation in the Fluoroscopy
operating mode. However, radiation may be disrupted.
Select Transfer > Record Off-line Files in the main menu.
– Recording is started in single session mode.
Note that the CD/DVD-R and the Local Job Status clipboard must be empty.
Recording can be started only after all jobs have been deleted from the clipboard.
During the recording process it is not possible to copy files to the source direc-
tory.
All recorded files will be deleted from this directory after recording on CD-R is
completed.
Operator Manual
SPR2-310.620.30.02.02
0