Defining default print
settings
ARCADIS Varic
SPR2-310.620.30.02.02
Defining print settings
On the Options card, you can define print settings for the reports.
Click the Options card into the foreground.
– The card has three subcards that you can access using the tab at the left-
hand edge.
Click the General subcard into the foreground.
Select the required printer from the Default printer selection list.
Select the required paper size from the Default papersize selection list.
The default print settings on the General subcard are valid for the LithoReport
and the Radiation Summary Report.
Examination
0
49
of 52