Completing The Examination - Siemens ARCADIS Varic Operator's Manual

Examination
Finishing an
examination
Examining the next
patient
20
of 52

Completing the examination

After you have completed your exposures, the last acquired image is displayed
on the left monitor. Now you finish the examination of the current patient.
If you want to examine the next patient immediately afterwards, you can register
him or her at once. In this case the examination of the current patient is automat-
ically finished.
Call up Patient > End Exam in the main menu.
— or —
Press function key F4.
– The examination is concluded. Patient and examination data are deleted
from the Examination card.
– If the MPPS option is installed, the Modality Performed Procedure Step
window for performance documentation is now displayed automatically.
( Register 4: Patient data, Page 42).
Call up Patient > Register in the main menu and register the next patient for
the examination.
– The examination of the previous patient is completed.
– The data of the new patient are loaded into the Examination card.
Operator Manual
SPR2-310.620.30.02.02
0