Configuring Film Layouts; Selecting A Layout - Siemens ARCADIS Varic Operator's Manual

Documentation
Defining a
study-specific layout
52
of 98

Configuring film layouts

You can change and create film layouts using the Film Task and the Series cards
in the Filming Layout window.

Selecting a layout

In the Filming Layout configuration window, you can define the study-specific
layouts.
In the Layout name selection list, you can specify which layout you want to
change.
During installation of your system, some study-specific layouts are also installed
and assigned to individual studies or series.
This has the advantage that a suitable film layout is always used for these images.
You can adapt the default settings to your requirements by creating a new study-
specific layout and assigning it to a study or changing an existing layout.
Select the layout that you want to change.
Or
Enter a new name.
– A new layout is generated.
Your system can manage up to 100 layouts. If you attempt to create a 101st layout,
an error message is displayed. You will then need to delete an existing layout.
( Page 60)
Operator Manual
SPR2-310.620.30.02.02
0
0