Configuring Selection Lists - Siemens ARCADIS Varic Operator's Manual

ARCADIS Varic
SPR2-310.620.30.02.02

Configuring selection lists

To generate a LithoReport, you define in the Parameter sets card which entries
are to be shown in the selection lists.
Click the Parameter sets card into the foreground.
In the left list, select the parameter for which you want to configure the selec-
tion list.
– In the right list you can see the currently available selection possibilities for
this parameter.
Using the icon buttons above the list, you can adapt the list to your requirements.
Symbol Comment
Inserts another list entry.
Deletes the active list entry.
Moves the active list entry up one line.
Moves the active list entry down one line.
If necessary, select the list entry that you want to edit and click on the icon of
the required function.
Examination
0
47
of 52