Releasing The Exposure; Removing The Cassette; Removing The Cassette Holder; Switching The Operating Mode - Siemens ARCADIS Varic Operator's Manual

Options
24
of 24

Releasing the exposure

Press the release button on the hand switch to release the direct exposure.
The radiation indicators light up during the exposure. The radiation indicators
light up a little longer for very short exposure times so that radiation is clearly
indicated.
During the exposure or after ending the exposure, an acoustic warning signal
sounds (can be configured).

Removing the cassette

Take the cassette out of the cassette holder.
– After removing the cassette, the exposure data remains until another oper-
ating mode is selected.

Removing the cassette holder

Hold the spring.
Gently push the cassette holder downward, lifting it over the front ring to
remove it.

Switching the operating mode

You must remove the cassette before changing over to another operating mode.
Select the desired operating mode.
Or
Release fluoroscopy without selecting an operating mode.
– If no operating mode is selected, the system automatically reverts to the
operating mode selected prior to the cassette exposure.
Operator Manual
SPR2-310.620.30.02.02
0
0
0
0