Configuration
Parameter settings
Changing parameters
14
of 24
The Common tab card
On this tab card you define the parameters that apply to all operating programs
in each examination set.
You can change the following parameters on the tab card:
Parameters
Black Offset Native
Black Offset Native Metal
Auto Dose Adjustment
Auto Dose Adjustment Metal
Select the required new parameters from the selection lists.
Click this button.
– Your changes are applied to the ARCADIS Varic system.
– The configuration dialog remains open for further entries.
Continue configuring the next operating mode on the corresponding tab card.
— or —
Click this button.
– The dialog box closes.
Remarks
possible values: -200 to 900
possible values: -200 to 900
Operator Manual
SPR2-310.620.30.02.02
0