Filming And Printing - Siemens ARCADIS Varic Operator's Manual

Documentation
Manual filming
6
of 98

Filming and printing

Image material is filmed/printed in two steps:
First, specify on one of the task cards or in the Patient Browser which images
or series you want to print or expose on film. Then transfer the selected im-
ages to the virtual film sheet.
From the virtual film sheet, you can either send your selected images directly
to a camera/printer, or you can perform additional processing steps first.
If a local printer is connected, you can print individual images on paper or X-ray
film directly in the OR.
( Page 11)
Scenes (multiframe objects) with more than 1023 images cannot be sent to a
DICOM camera.
Image material can be printed or exposed on film either automatically or manually.
You transfer images to the virtual film sheet. After that, you manually initiate the
transfer to the camera or printer. In doing so, you can select the images that you
want to expose on film or print.
Operator Manual
SPR2-310.620.30.02.02
0