Image Processing
Applying changes
Resetting to default
settings
Discarding changes
70
of 78
Concluding configuration
If you have changed the settings in the cards of the configuration window, you
must confirm them. If you have changed parameters by accident, you can reset
these values to default values or reject all your changes.
Confirm with OK.
– All changes are applied.
– The Viewer Configuration dialog window is closed.
Or
Click Apply.
– The changes of the current card are applied.
– The Viewer Configuration dialog window remains opened.
– The changed settings are automatically applied the next time you load data
into the Viewing task card the next time.
Click Reset to Default.
– The values of the current card are reset to standard values.
– The Viewer Configuration dialog window remains opened.
Click Cancel.
– The changes are not applied.
– The Viewer Configuration dialog window is closed.
Operator Manual
SPR2-310.620.30.02.02
0