Rearranging Data - Siemens ARCADIS Varic Operator's Manual

Moving data
Signing for changes
ARCADIS Varic
SPR2-310.620.30.02.02

Rearranging data

The study images of a patient are sorted hierarchically by series and studies.
If required, you can change this assignment in the Patient Browser.
Data can be rearranged only within a patient entry.
The following restrictions apply for rearranging data:
Only images of the same application area that were acquired in the same
patient position can be merged.
The data hierarchy must be maintained, e.g. a study cannot be subordinated
to a series.
Delete-protected data or data currently loaded in an application cannot be
edited.
Select the study, series or images in the Patient Browser.
Move the selected data to the required position by drag & drop.
– The Rearrange dialog box for confirming your changes is displayed.
Enter your name under Modifier's name.
Or
Select your name in the selection list.
If you do not specify a name, the name with which you logged on to the system
is taken as the modifier.
Click on OK.
– The changes are saved and included in the history of changes.
Patient data
0
39
of 60