Documentation
74
of 98
Sending data to other addresses in the network
If you want to send data to addresses other than the standard addresses or to
more than one user in the network simultaneously, select the network node(s)
from a list.
First select the data that you want to send.
Select Transfer > Send to....
— or —
Click this button.
– The Send To dialog box is displayed with a list of all available network
addresses.
(1) Network Node
– Name of the network node (receiver name).
(2) Compression
– Compression method by which the data are prepared for faster transfer.
(3) Quality Factor
– The quality factor states the image quality of the compressed data com-
pared with the original data.
Select one or more network nodes.
Click Send.
– The selected data are sent to the required address(es).
Operator Manual
SPR2-310.620.30.02.02
0