Automatic/Manual Filming; Transferring Images To The Virtual Film Sheet; At The C-Arm System - Siemens ARCADIS Varic Operator's Manual

Configured printers/
cameras
Initiating local printing
ARCADIS Varic
SPR2-310.620.30.02.02

Automatic/manual filming

The filming and printing of examination images is performed in two steps:
Transfer of images to the virtual film sheet.
Transfer of these images from the virtual film sheet to a camera or printer
where they are exposed on film or printed on paper.
Make sure the printer is switched on before you send images to print.
Siemens Service or your system administrator has configured one or several
printers/cameras for your ARCADIS Varic system. At the same time, the names
of output devices that you can choose from selection lists as well as the specified
paper/film size were set up.
Note that you can only print on the paper/film size that was configured for the
respective output device.

Transferring images to the virtual film sheet

Images can be transferred for printing from different applications via the control
panel on the C-arm system or at the monitor trolley.

At the C-arm system

If a local printer is connected, you can print individual images on paper or X-ray
film directly in the OR.
Press the Print key on the control panel of the C-arm system.
– The currently selected image is copied to the virtual film sheet.
– Depending on the setting for exposure on film, the image is transferred
directly to the specified (local) printer and printed there.
Documentation
11
of 98
0
0
0