Configuration; Calling Up The Configuration Window - Siemens ARCADIS Varic Operator's Manual

Examination
Configuring the
LithoReport
46
of 52

Configuration

The generation, printing and exporting of reports is configured in the Structured
Reporting dialog. Depending on the type of report (LithoReport or Radiation
Summary Report), you have different configuration possibilities.

Calling up the configuration window

You can call up the configuration window from the syngo Configuration Panel.
Select Options > Configuration from the main menu.
Double-click the Structured Reporting button.
– The Structured Reporting dialog is displayed.
To configure a LithoReport, you perform settings on the following cards:
Parameter sets: Here you define the contents of different selection lists.
Stone locations: Here you define the position indications for nephroliths
(gallstones etc.).
Options: Here you perform the presettings for LithoReport printing.
Operator Manual
SPR2-310.620.30.02.02
0
0