Selecting Film Sheets And Images - Siemens ARCADIS Varic Operator's Manual

Documentation
Paging through
several film sheets
Selecting a film sheet
Deselecting a
film sheet
Selecting multiple
selection
28
of 98

Selecting film sheets and images

After you have opened a film job, its images are displayed in the left-hand part of
the Filming task card.
Page through the film sheets using the dog ears.
Or
Double-click on the number of the current film sheet.
– The display field becomes an input field.
Overwrite the number displayed with the number of the sheet that you want
to go to.
Press the Enter key.
– The film sheet you have entered is displayed.
Click on the border of the film sheet.
– All the segments of the film sheet are now shown with a clear border.
Click outside the film sheet with the left mouse button.
Or
Select a single image, another film sheet or another film job.
– Your selection is canceled.
You can also select several film sheets at once.
Click on the border of the first film sheet of your choice holding the Ctrl key
down.
Page to another film sheet.
Hold the Ctrl key pressed to extend your selection by a single film sheet.
Or
Hold the Shift key pressed to select all the film sheets between the two film
sheets including all their images.
When you have selected a film sheet, all images have a line border.
Operator Manual
SPR2-310.620.30.02.02
0