Transferring Images Manually - Siemens ARCADIS Varic Operator's Manual

Exposing the current
film task
ARCADIS Varic
SPR2-310.620.30.02.02

Transferring images manually

If the Auto Expose option is deactivated, all images to be filmed are collected in
the virtual film sheet as film jobs. You decide which jobs are filmed or printed at
what time.
Caution
The "printed" flag is set as soon as the images are successfully transferred to
the printer driver. Not all printers (e.g., paper printers) can solve printing prob-
lems themselves.
The image printout may be lost!
Verify that the printouts are available before you delete images.
Call up Film > Expose Film Task.
– All images of this film job are transferred to the camera or printer.
Or
Click the Expose Film Task button.
– All images of the film job are transferred to the camera.
If you only want to expose a single film sheet instead of a whole film job, then
select the desired sheet in the Filming task card or in the Film Preview window
and expose it from there.
( Page 19)
Documentation
17
of 98
0