Modules; Hardware; Display - Bosch FPA‑5000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
3.
4.
5.
6.
7.
13.3

Modules

To display diagnostic information about a particular module:
1.
2.
3.
4.
5.
6.
7.
13.4

Hardware

13.4.1

Display

Four different functions are offered:
–
–
LED test
To test the LEDs in the LED display:
1.
2.
3.
4.
Display test
To test the operativeness of the display:
1.
2.
Bosch Sicherheitssysteme GmbH
Select Yes.
A list of various data types is displayed.
Select the field you require.
The field is marked.
The data of each selected element is requested.
Select Start.
To cancel the operation, select Cancel.
A status bar appears.
Select the arrow keys to display further information.
Select Refresh to update data if necessary.
In the start menu, select Diagnostics
Modules
Two different lists are offered.
Select a list, e.g. By number. Refer to chapter Scrolling through lists for information on
how to scroll through a list.
A list of all used modules is displayed.
Select the list field you require.
A list of various information options is displayed:
– Module passport
– Module Compatibility
– Module status
For an LSN module, the following selection fields are also offered:
– Module status and counters
– Reset counters
Select the information option you require, e.g. Module status.
Diagnostic information about the module status is displayed.
A status bar appears.
Select the arrow keys to display further information.
Select Refresh to update data if necessary.
LED test: Test the LED display.
Display test: Test the operativeness of the display.
In the start menu, select Diagnostics
Hardware
Display
Select LED test.
For the duration of approx. five seconds, all LEDs on the LED display light up.
In the start menu, select Diagnostics
Hardware
User Guide
Diagnostics | en 57
2020-07 | 3.0 | F.01U.378.877