Sequence Of The Fault Messages; Information About Malfunctioning Element Groups; The Newest Message - Bosch FPA‑5000 User Manual

46 en | Fault message
Notice!
A maximum of four fault messages can be displayed on the display at any time. Only fields
that can be operated are displayed (e.g. Acknowledge and Reset).
To display further fault messages, scroll down through the list.
The next four fault messages are displayed.
10.2.2

Sequence of the fault messages

The messages are displayed in chronological order.
Notice!
15–30 seconds after the last entry (e.g. after scrolling through the list), the first and last fault
message is displayed at the beginning of the list again.
10.2.3

Information about malfunctioning element groups

The trouble message contains information about:
–
–
–
–
–
–
Example:
Fault
#001
Element category:
Message type:
Address of element groups 00005: The fifth logical zone caused the first fault.
Number of individual
elements
Message number
Installation location of the
logical zone
Notice!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
10.2.4

The newest message

The newest message is displayed at the end of the list.
2020-07 | 3.0 | F.01U.378.877
Element category
Message type
Address of the element group
Number of individual elements that have caused a fault in the respective element group
Message number
Additional information (e.g. the installation location)
Zone
Office 1
00005
Different detectors in one logical zone
Fault
(6): In the fifth logical zone (00005), six detectors caused a
fault. For element groups that only consist of one element, the
number of elements is not displayed.
The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
001: The first and oldest fault message received.
Office 1
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
(6)
Bosch Sicherheitssysteme GmbH