Maintenance; Menu Overview; Change Language; Activate Outputs - Bosch FPA‑5000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
14

Maintenance

This chapter contains information about the following points:
–
–
–
–
–
–
–
14.1

Menu overview

Maintenance
14.2

Change language

Notice!
The fastest way to change the language display is via a shortcut; see also Changing language
display, page 28 .
There are two ways of selecting a different language display:
–
–
Notice!
After the system starts up following a power cut or battery failure, the default language
defined in the FSP-5000-RPS programming software is set again.
Making a selection via the menu
1.
2.
3.
14.3

Activate Outputs

1.
2.
3.
4.
5.
6.
7.
Bosch Sicherheitssysteme GmbH
Walktest: see Maintenance – walktest, page 65
Change language, page 63
Activate Outputs, page 63
Activate Transmission Device, page 64
Detector removal
History Log: see Maintenance – history log, page 69
Bypassing/Un-bypassing buzzer, page 64
-> Walktest
Activate outputs
History log
Using the menu
Entering a shortcut; see Changing language display, page 28 .
In the start menu, select Maintenance
Change language
A list of the languages which can be selected is displayed.
Select the language you require.
The displays are displayed in the selected language.
In the start menu, select Maintenance
Activate outputs
Various element categories are displayed.
Select a category or Select by number and enter the number of the element into the
search screen; see also Search Function/Element, page 26
Select the required list fields. The list fields are marked.
Select On to activate the selected notification appliances.
The selected signaling devices are activated.
Select All to activate all notification appliances.
To end activation of the selected elements, repeat the same steps but select Off in step
5.
Change language
Activate transmission device
Bypass buzzer
User Guide
Maintenance | en 63
2020-07 | 3.0 | F.01U.378.877