Module Design; General Information; Covering Plate; Labeling Templates For Slide-In Strips - Bosch Rexroth VAM 10.2 Project Planning Manual

DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
7

Module design

7.1

General information

7.1.1

Covering plate

7.1.2

Labeling templates for slide-in strips

7.2

Modules

7.2.1 General information
The devices of type VAM 10.2/VAM 40.2 are delivered without a
rear covering plate.
Please find the labeling templates on the Bosch Rexroth web site or contact
your sales representative.
The labels for the machine function keys can be created with the templates
and can be printed on transparent foil or on paper using a laser printer.
After cutting out the slide-in strips, the slide-in strips can be inserted on the
rear side of the devices.
As the VAM 10.2 corresponds to the VAM 40.2 basic device, this
device is not described additionally.
Fig. 7-1: Basic device
Bosch Rexroth AG 29/69
Module design