Fire Alarm; Evacuation - Bosch FPA‑5000 User Manual

40 en | Fire alarm
9

Fire alarm

Notice!
Detailed information about types of alarms, alarm delays and the panel controller display can
be found in Alarm, page 34 .
This chapter contains information about the following points:
–
–
–
–
–
–
–
–
Signaling fire alarms
A fire alarm is signaled optically and acoustically on the panel through:
–
–
–
Notice!
Alarm messages have the highest priority compared with all other message types. If a fire
alarm is reported, the system switches automatically to alarm indication.
9.1

Evacuation

You can manually control all available evacuation zones.
Press the evacuation button
search for a specific zone, enter the number of a group of notification appliances and press
Notice!
The individual control of each group is only possible for panel controllers with a premium
license.
Select the required group to start or stop the evacuation of this zone immediately. Use
and
according to their current state.
Select All On to control all evacuation groups or All Off to stop the activation of all groups at a
time.
The background colors of the groups have the following meaning:
–
2020-07 | 3.0 | F.01U.378.877
Optical and acoustic signals, page 41
Acknowledging a message, page 41
Silence internal buzzer, page 41
Activate and silence signaling devices, page 41
Resetting signaling devices and transmission devices, page 41
Triggering fire verification, page 42
Resetting alarm message, page 43
Bypassing detectors, page 44
Displaying the logical zones on the display
Lighting up the "Alarm" LED icon
An internal buzzer sounds on the system.
.
to scroll through the list. The group entries change their background color
Red: Groups which are actively being controlled in case of an alarm
to open the list with all available evacuation zones. To
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH