54
en | Block
12
Block
This chapter contains information about the following points:
–
–
Caution!
All alarm and fault messages from blocked detectors are no longer displayed.
!
12.1
Menu overview
Bypass
-> Bypass
Block
Block
12.2
Blocking and unblocking elements
Select the element you require in the submenu.
Example:
To block a detector, select the following in the start menu:
1.
2.
3.
4.
5.
6.
C
A C after a detector means that this detector is part of a closed group and cannot be blocked
individually. In order to block a detector marked in this way, please select Logical zone in step
3.
12.3
Displaying list of all blocked elements
12.3.1
Using the menu
To display a list of all blocked elements, select the following in the start menu:
1.
2.
2020-07 | 3.0 | F.01U.378.877
Blocking and unblocking elements, page 54
Displaying list of all blocked elements, page 54
Show blocked devices
-> Sounder
Transmission device
Logical zone
Bypass Block
Block
Detector
Various selection criteria are displayed. See also Working with lists, page 24 .
Select a selection criterion, e.g. By description.
A list of the detectors is displayed. Refer to Scrolling through lists, page 25 for
information on how to scroll forward and backward through the list.
Select the required list fields.
The list fields are marked.
Select Block.
The selected elements are blocked.
To unblock the elements again, repeat all previous steps but select Un- block in step 6.
Bypass Block
Block
Select by
number
Strobe
Detector
More...
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Block Group
Printer
HVAC
Doorholder
Extinguishing
Annunciator
system
-> Control
Interface
element
module
Bosch Sicherheitssysteme GmbH