Fault Message; Calling Up Fault Indication; Fault Message On The Panel; Acknowledging A Message - Bosch FPA‑5000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
10

Fault message

This chapter contains information about the following points:
–
–
–
–
10.1

Calling up fault indication

Notice!
If a fire alarm is reported, the system automatically switches to alarm indication. To return to
the fault indication, select Fault on the status bar. In the event of a fire alarm, the display
automatically switches back to the alarm indication after 30 seconds.
To display the fault messages from the alarm indication or any other menu, select the
following on the status bar:
–
–
Caution!
If a message does not have to be reset, it is removed from the display as soon as the fault has
!
been rectified.
Notice!
If individual elements that are combined with other elements in a group are malfunctioning,
the respective element group is displayed first of all. To display the individual elements,
select the element group you require. See also Displaying individual elements of an element
group, page 47 .
10.2

Fault message on the panel

10.2.1

Acknowledging a message

There are two ways to acknowledge messages:
–
–
Element groups
All addressed logical elements are displayed in a list.
List fields with yellow background indicate unacknowledged fault messages.
List fields without distinction indicate acknowledged fault messages.
Bosch Sicherheitssysteme GmbH
Calling up fault indication, page 45
Fault message on the panel, page 45
Resetting fault message, page 48
Blocking an element, page 49
Fault: A list of all reported fault types and the number of faulty elements are displayed.
Status: A list of all current messages, grouped by message type, is displayed. The number
of elements is also given in each case.
To display the fault messages, select the message category you require — in this case,
Fault.
0 0
Fire Control
Acknowledging all displayed messages: Select Acknowledge.
Acknowledging an individual message: First select the message and then press
Acknowledge.
8 0
Fault Bypass
User Guide
Fault message | en
Status
2020-07 | 3.0 | F.01U.378.877
45