Send Ping Command; Remote Services - Bosch FPA‑5000 User Manual

60 en | Diagnostics
Information on the following parameters is displayed in the table:
–
–
–
–
–
–
13.7.4

Send ping command

To check the availability of other nodes in the network, a ping command can be sent to a
specific IP address:
1.
2.
3.
4.
13.7.5

Remote services

Remote Services offer a secure remote internet connection to AVENAR panel 8000/2000 for
system integrators. The following features are available:
–
–
–
For these services the secure network gateway for Remote Services is required. For detailed
instructions on setting up any of the Remote Services please refer to the Networking Guide.
Remote Maintenance
If the Remote Maintenance feature was activated via the remote programming software
FSP-5000-RPS data of relevant LSN devices and AVENAR panel 8000/2000 modules are
collected and sent either to the Bosch RemotePortal or a central management server system
(CMS) over a private secure network where they can be analyzed in order to offer customers
preventive services.
Notice!
The Remote Maintenance feature over private secure network is only available in Germany
together with a service agreement with Bosch Energy and Building Solutions .
Remote Access
With Remote Access all maintenance and service functions possible with the Remote
Programming Software FSP-5000-RPS can be done from remote (e. g. Remote Terminal,
configuration of the panel, trouble shooting).
2020-07 | 3.0 | F.01U.378.877
Port status
Link status: Checks the operativeness of the network cable
Speed: Speed of the network connection
#Tx Frames: Number of transferred data packages
#Rx Frames: Number of received data packages
Connected to: Indicates neighboring available node
In the start menu, select Diagnostics
Network services
Send ping command
Enter the IP address of the network node you wish to assess as regards availability and
select Send ping command.
To enter an IP address:
Touch the field containing the IP address. Use the arrow keys on the operating panel to
select the individual numbers and modify using the number keys on the alphanumeric
keypad.
Or:
Touch the Change field. Touch the field containing the number block to be changed. Use
the arrow keys on the operating panel to select the desired number and modify using the
number keys on the alphanumeric keypad.
If the addressed network node is accessible, a success message is displayed.
Remote Maintenance
Remote Connect
Remote Alert
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH