Control / Monitor; Menu Overview; Activate Doorholder, Control Element Or Hvac; Go To Element - Bosch FPA‑5000 User Manual

86 en | Control / Monitor
21

Control / Monitor

This chapter contains information about the following topics:
–
–
–
21.1

Menu overview

Control Monitoring
21.2

Activate doorholder, control element or HVAC

You can manually activate doorholders, control elements or climate systems.
1.
2.
Notice!
The individual control of each group is only possible for panel controllers with a premium
license.
Press the required element to start or stop the activation of this element immediately. Press
All On to activate all elements or All Off to stop the activation of all elements at a time. Use
color according to their current state.
The background colors of the elements have the following meaning:
–
–
–
–
21.3

Go to element

To search for an element which is connected to the system:
1.
2.
3.
4.
21.4

Search for function

To search for a:
1.
2020-07 | 3.0 | F.01U.378.877
Activate doorholder, control element or HVAC, page 86
Go to element, page 86
Search for function, page 86
-> Activate doorholder
Press Control Monitoring
Press the required button (Activate doorholder, Activate control element or Activate
HVAC) to open a list with all available elements of the required group.
and to scroll through the list. The element entries change their background
Red: Elements which are actively being controlled in case of an alarm
Fuchsia: Elements which are actively being controlled without a real alarm
Green: Elements which are not active
Yellow: Elements in fault or disabled, no control is possible.
In the start menu, select Search function / element
Go to element
Three different lists are offered.
Select a list, e.g. By description.
A list of the detectors is displayed.
Select the list field you require.
Different selection fields may be offered for the selected element (e.g. OK, Bypass). What
is displayed depends on:
– the message types (e.g. fault, alarm etc.) that can be assigned to this element.
– the mode (e.g. bypassed, reset etc.) that the selected element is in.
In the start menu, select Control Monitoring
Activate control element Search function
Go to element
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Activate HVAC
Bosch Sicherheitssysteme GmbH