Table of Contents
Advertisement
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
6
Module Design
6.1
General Information
6.1.1
General Information
6.1.2
Labeling Templates for Slide-In Strips
6.2
Modules
6.2.1
EMERGENCY-STOP Button
EMERGENCY STOP button
VAM 12.1/VAM 42.1 devices are delivered without a rear covering
plate.
Please find the labeling templates on the Bosch Rexroth web site or contact
your sales representative.
The labels for the machine function keys and for the 22.5 mm control and indi‐
cator units can be created with the templates and can be printed on transparent
foil or on paper with the help of a laser printer.
After cutting out the slide-in strips, they can be inserted on the rear side of the
devices.
As the VAM 12.1 corresponds to the VAM 42.1 device, this device
is not described additionally.
Fig.6-1:
EMERGENCY STOP button
This module slot is equipped with a standard EMERGENCY STOP button,
which is not wired. The two N/C contacts of the switching elements can be wired
with the EMERGENCY STOP circuits of the machine as required.
Bosch Rexroth AG
43/93
Module Design
Advertisement
Table of Contents
