Standby Screen - Bosch FPA‑5000 User Manual

18 en | In overview
Text
Panel 4-1
Level 3 logged in
Bypass Block\Block\Detector
Menu field
To select a main menu, touch the corresponding menu field on the touch screen. In All
functions at a glance, page 11 , there is an overview of all main menus with their respective
submenus.
Status bar
This status bar is available on each menu. In addition, other status bars are offered in some
menus; see also Switching between status bars, page 29 :
The leading number specifies the number of elements in the respective state:
Fire
Control
Fault
Bypass
In addition it is possible to display an overview of the type and nature of all message types
received by the panel:
Status
To display the individual elements, touch the relevant field with your finger.
The Control and Fault status fields are identified by the letters "B" and/or "C":
–
–
4.4

Standby screen

When the touchscreen is not operated, its backlight switches off after 5 minutes.
Notice!
In case of an active alarm or fault message, the backlight switches off after 60 minutes. The
display switches back to this message from any other element of the menu after 30 seconds.
If the screen is black, touch it gently to display the standby screen. The following information
is displayed on the standby screen:
–
2020-07 | 3.0 | F.01U.378.877
0 0
Fire Control
Number of groups that have triggered a fire alarm
Elements that are activated
Elements that have reported a fault
Disabled elements
Display of a list of the various message and status types and the
number of elements in the respective state
"B" means that controllers for type B fire protection equipment (G-B) are affected (e.g.
control elements without acknowledgement).
"C" means that controllers for type C fire protection equipment (G-C) are affected (e.g.
extinguishing systems).
Date
Meaning
Logical node address
Access level of the operator who is logged in.
Possible levels: 2, 3 or 4
Only displayed in the main menu.
Menu path of the selected menu
For reasons of space it is not always possible to display the
complete path.
8 0
Fault Bypass
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Status
Bosch Sicherheitssysteme GmbH